Incloloy800 is a Ni-Fe-Cr alloy with Ni and Cr as its main alloying elements. With excellent mechanical properties and high temperature microstructure stability, Incloloy800 is widely used as an important structural material in aerospace and nuclear power industries [1]. The main strengthening......
Read MoreIn this paper, bulk nanocrystalline copper with a thickness of about 600 μm was prepared by electrodeposition, and annealed at 100-250 °C. The effect of annealing temperature on the microstructure and mechanical properties of nanocrystalline copper was studied. The results show that both unann......
Read MoreFe76Ga5Ge5B13-xPxCu1 (x=0, 3, 5, 7) alloy strips were prepared by single-roll spin quenching, and the effects of annealing temperature on the crystallization behavior, structural evolution and magnetic properties of the alloy were studied. The results show that the replacement of P element wit......
Read MoreFe74.1Cu1Nb3Si15B6.9 (%, atomic fraction) nanocrystalline alloy was subjected to continuous tension annealing, and the effect of tension annealing-induced anisotropy on the magnetic properties of nanocrystalline alloy was studied. The results show that the induced anisotropy constant (Ku) and ......
Read MoreFe-based amorphous nanocrystalline alloys have excellent soft magnetic properties due to their low average magnetic anisotropy and magnetostriction coefficient. However, the magnetic permeability of Fe-based amorphous nanocrystalline materials decreases rapidly with the increase of frequency, ......
Read More1. Soft magnetic properties of Fe based amorphous nanocrystalline alloy soft magnetic materials Compared with Permo alloy, silicon steel, ferrite, etc., Fe-based amorphous nanocrystalline alloy has more excellent comprehensive soft magnetic properties, such as higher Bs, higher permeability, l......
Read MoreThe nanocrystalline iron core is extremely brittle after annealing, so it is not suitable for direct cutting. Usually, epoxy resin is used as the curing agent to package and cure the iron core, but the nanocrystalline iron core cured by epoxy resin is not easy to fully fill the gap between the......
Read More
Copyright © 2018.Company name All rights reserved.
